Downsizing Your Program with Greater Energy Chains
HK variety roller chains conform to H variety of ANSI, and their thickness of inner and outer link plates are equal to these in the following greater size chain. As a result, HK form roller chains are higher in tensile power by about 20%and in optimum allowable load by about 15% than those of conventional roller chains. Since the weight of your chains is also more substantial, HK variety roller chains are ideal for your application 
of hefty duty at lower velocity.
Proposed uses
?Optimum for locations the place larger strength is needed but significant and heavier chains can’t be made use of.
Variety of chains
Select a appropriate HK form roller chain based on “Low-speed selection”
For that highest allowable load, see the following table of dimensions.
HK variety roller chains are available up to triplex.
Sprockets
Use typical sprockets for a simplex HK roller chain Because the transverse pitches are more substantial than these of typical chains in the situation of duplex or triplex, regular sprockets can’t be utilised. Refer to the sprocket tooth profiles for HK
Connecting hyperlink and offset hyperlink
The tensile strength of connecting backlinks and offset back links are listed on the left, however the optimum allowable load is reduced than that of your base chain. Please talk to us must you’ve got any questions. It really is advisable to work with the connecting hyperlink of interference-fitted (FJ, HJ)
Never make the holes from the connecting plate bigger and by no means make the pins thinner to facilitate the perform for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue strength might be lowered.
Variety of chains
Decide on a correct HK kind roller chain depending on “Low-speed selection”
For the highest allowable load, see the next table of dimensions.
HK style roller chains can be found up to triplex.
Sprockets
Use regular sprockets to get a simplex HK roller chain Since the transverse pitches are bigger than individuals of normal chains in the case of duplex or triplex, conventional sprockets are unable to be employed. Refer for the sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting hyperlinks and offset back links are listed on the left, however the maximum allowable load is reduce than that from the base chain. Please seek advice from us ought to you may have any concerns. It truly is encouraged to work with the connecting website link of interference-fitted (FJ, HJ)
By no means make the holes in the connecting plate greater and never ever make the pins thinner to facilitate the get the job done for fitting the pins into the connecting plate, because otherwise the fatigue power might be lowered.
