Power UNITS FOR LIFT TABLE 1
Basic Description
This power unit is developed exclusively for the modest lift table,Consisting of substantial pressure gear pump, AC motor, multi-functional manifold, valves, tank, and so on. This electrical power unit is broadly utilized while in the business of logistic gadgets such as minifork lift, scissors lift and ariel functioning platforms. The lower-ing movement is managed from the solenoid valve together with the velocity managed by the adjustable needle valve.
Energy UNITS FOR LIFT TABLE 2
Standard Description
This electrical power unit is designed exclusively for the medium lift table, Consisting of remarkably effecient gear pump, AC motor, multifunctional manifold, valves, tank, ect. The decreasing motion is actived through the solenoid valve and the speed controlled from the adjustable needle valve. Once the lift rises to a large positoin, however the energy supply is cut, the reducing motion is controlled by the manual override perform.
Energy UNITS FOR LIFT TABLE 3
Standard Description
This energy unit is designed solely to the huge lift table, Consisting of really effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The decreasing motion is actived through the solenoid valve as well as pace managed by a stress compensated flow handle valve.
Power UNITS FOR LIFT TABLE 4
Basic Description
This power unit is made exclusively for your significant lift table, Consisting of hugely effecient gear pump, AC motor, multi-functional manifold, valves, tank, ect. The reducing movement is actived through the solenoid valve plus the speed managed by the adjustable needle valve. When the lift rises to a high positoin, but the energy supply is lower, 
the lowering movement is controlled from the manual override perform.
Unique Notes
one. This power unit is of S3 duty cycle, which may only function intermittently and repeatedly, i.e. 1 minute on and 9 minutes off.
two. Clean the many hydraulic parts concerned in advance of set up of the electrical power unit.
three. Viscosity with the oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities.N46 hydraulic oil is advised.
four. Oil transforming is needed immediately after the initial one hundred operation hours,afterwards once every single 3000 hrs.
5. The electrical power unit proven is designed to be mounted vertically.
