Standard Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is designed to operate materials managing products. The reducing movement is achived by the solenoid valve with all the lowering speed managed by an adjustable needle valve. The left and proper functions are equipped using a dual pilot operated test valve and cross-over relief valves.
Remark: Please talk to our revenue engineer to the unique pump displacement, motor energy or tank capability.
Unique Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic components concerned just before installation of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which really should also be clean and cost-free of impurities.N46 hydraulic oil is proposed.
4. This energy unit must be mounted horizontal.
five. Check the oil degree within the tank following the primary start out in the energy unit.
six. Oil changing is needed right after the preliminary one hundred operation hours, afterwards when every 3000 hours.