Any injury to the teeth surfaces of the sprocket diminishes the daily life of the conveyor chain.
With traditional sprockets, substantially worn sprocket teeth had been repaired by teeth padding or the complete sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is highly rated by our prospects to the dramatic cost savings in expense and time.
The teeth is usually replaced by two techniques: personal tooth replacement or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the correct.
The above photo along with the prime right illustration display a sprocket for personal tooth replacement. Since the joint face in between the replaced teeth plus the sprocket is formed in the one of a kind arc, the bonding accuracy is substantial and the sprocket power is enhanced. Additionally, because the load acting within the mounting bolts is decreased, there is certainly much less probability of loosening. This sprocket development is patented.
There are two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for massive sprockets getting heavy loads and welded sheet steel hubs for other applications.